Configuring Your Hardware

This page contains information on configuring your control system hardware such that you may use them in your own projects.

• Getting Started
  • Creating a Configuration
• Configuring a DC Motor
  • Configuring a DC Motor Instructions
• Configuring a Servo
  • Configuring a Servo Instructions
• Configuring a Color Distance Sensor
  • Configuring a Color Distance Sensor Instructions
• Configuring a Digital Touch Sensor
  • Configuring a Digital Touch Sensor Instructions
• Configuring an External Webcam with a Control Hub
  • Introduction
  • Type of External Camera
  • Connecting the Camera
  • Camera Configuration
  • Sample Op Modes
  • Image Preview
  • Scrcpy
  • External HDMI Monitor
  • Advanced Users
• Configuring an External UVC Camera and a Powered USB Hub
  • Introduction
  • What type of External Camera can be Used?
  • USB Hub
  • Sample Op Modes
• Adding an Expansion Hub
  • Introduction
  • Equipment Needed
  • Connecting the Expansion Hub
  • Configuring Both devices
  • Using Two Expansion Hubs
• Saving the Configuration Information
  • Saving the Configuration Information Instructions